Knowledge

Home > Knowledge > Content
Drawer Racking Of The Specification
Jul 11, 2018

Drawer racking specification:

1) Die and Mould racks are very convenient to use die / mould storage devices with a built in lifting and lowering chain hoist.

2) The drawers are sturdy and can be pulled out and pushed back with the load.

3) In order to remove a die or mould from the rack simply put out the drawer on which the mould is placed.

4) Pull the monorail trolley and the chain hoist above the mould. Attach the hook of the hoist to the mould.

5) Lift the mould with the chain hoist about 2 inches above the drawer.

6) Push back the drawer into the rack and lower the mould to the ground or to a pallet lying in front of the rack.

7) The mould can now be moved to the machine with a pallet truck. 








Copyright © Nanjing OTS Racking Equipment Co.,Ltd All Rights Reserved.Tel: +86-25-86280550