Home > Industries > Content
Drawer Racking Specification
Sep 06, 2018

1) Die and Mould racks are very convenient to use die / mould storage devices with a built in lifting and lowering chain hoist.

2) The drawers are sturdy and can be pulled out and pushed back with the load.

3) In order to remove a die or mould from the rack simply put out the drawer on which the mould is placed.

4) Pull the monorail trolley and the chain hoist above the mould. Attach the hook of the hoist to the mould.

5) Lift the mould with the chain hoist about 2 inches above the drawer.

6) Push back the drawer into the rack and lower the mould to the ground or to a pallet lying in front of the rack.

7) The mould can now be moved to the machine with a pallet truck. 

mold storage rack2_副本.jpg

Nanjing OTS racking equipment manufacturing co., specialized in storage racking,logistics equipment,tooling and station apparatus.In 2004,the factory was founded,and we have registered OTS in 2012.Our company has passed CE&ISO9001 international quality system certification,and compliance with international standards certification system FEM 10.2.02,SEAM,RMI and AS4084-1993.

OTS Racking is specialized in light duty shelving , medium duty rack , long span rack , pallet rack , heavy duty racking , drive in racks , narrow aisle racking , shuttle racking , cantilever racks , steel platform , mezzanine , mold rack , drawer racking , gravity shelving , push back racks , mobile racking , ASRS etc .

Copyright © Nanjing OTS Racking Equipment Co.,Ltd All Rights Reserved.Tel: +86-25-86280550