Logistic industry news

Home > News > Content
How To Use The Steel Platform
Oct 31, 2018

According to the actual place and specific requirements, the steel platform can be designed as a single layer or a multi-layer, and the multi-layer is generally 2-3 layers. Unlike other storage shelves, the steel platform will have people or cars moving around as a shelf manufacturer. We will also pay more attention to the safe use of the shelves.

1. The steel platform should be equipped with a limited load card, especially a steel platform with a hydraulic lifting platform, and it is necessary to mark the load limit at the prominent position;

2. The resting point and upper drawing point of the steel platform must be located on the building and must not be placed on the construction facilities such as scaffolding. The supporting system must not be connected to the scaffolding.

3. The concrete beam plate of the steel platform resting point shall be embedded and connected with the bolt of the platform.

4. The horizontal angle between the wire rope and the platform should be 45 degrees to 60 degrees.

5. The beam-column of the upper part of the steel platform should be checked for tensile strength to ensure the safety of the building and the platform.

6. The steel plate should be used with a snap ring. The hook should not be hooked directly to the platform ring.

7. When installing the steel platform, the steel wire rope should be hung with special hooks. When adopting other methods, the buckle should be no less than 3, and the steel wire ropes of the sharp corners of the building should be lined with soft cushions. 

Nanjing OTS racking equipment manufacturing co.,ltd.is specialized in storage racking,logistics equipment,tooling and station apparatus.In 2004,the factory was founded,and we have registered OTS in 2012.Our company has passed CE&ISO9001 international quality system certification,and compliance with international standards certification system FEM 10.2.02,SEAM,RMI and AS4084-1993.

OTS Racking is specialized in light duty shelving , medium duty rack , long span rack , pallet rack , heavy duty racking , drive in racks , narrow aisle racking , shuttle racking , cantilever racks , steel platform , mezzanine , mold rack , drawer racking , gravity shelving , push back racks , mobile racking , ASRS etc . 


Copyright © Nanjing OTS Racking Equipment Co.,Ltd All Rights Reserved.Tel: +86-25-86280550